sales@typp.cn
You are here: Home » News and Events » Polyolefin Shrink Film PE PVC Shrink Wrap Film » PET shrink film technical data

PET shrink film technical data

Views:8     Author:Site Editor     Publish Time: 2017-10-07      Origin:Site

PET Shrink film for food wrapping,label,cap seal,printing,etc.

PET shrink film have high shrink ratio of 42%-75%,high transparent and glossy surface finish.

Thickness:35mic to 50micThe maximum width:8.7meters

PET Shrink film with excellent shrinking characteristics. It is applicable in various shrinkable packaging, such as outer wrapping for PET and glass bottles, cans and other kinds of containers. Especially good for full body wrappings, labels and cap seals where high shrinkage is required.

1. The PET shrink film thickness is from 35-50mic
2. Shrinkage from 42-75%
3. Width upto 8.7m
4. LOWER, Medium to super-high shrinkage properties
5. Simple & multiple contours, symmetrical shaped configurations allow for flexibility in container shape and design.
6. Suitable for gravure, flexographic & rotary offset printing
7. Runs on existing printing equipment using conventional inks
8. Works with heat-bar, solvent, hot-melt adhesive & laser seaming
9. Use in steam or hot air shrink tunnels
10. Excellent processability during printing & shrinking (smooth flat seams)
11. No de-lamination
12. High-impact strength
13. Gloss/gloss surface finish
14. Clear, transparent film
15. Attractive total system cost due to high-speed labeling, low scrap rate, quick changeover, and wide-web printing.

​Copyright © Su Qian Sid Import and Export Co.,Ltd. All Rights Reserved. Site Map