We can manufacture all types of PE protective Film with low adhesive, medium adhesive, high adhesive, extra high adhesive.
And colors of PE Protective Film have transparent, Blue, Yellow, Black, White, etc.
PE Protective film made of Polyethylene film coated with acrylic adhesive.
Our Polyethylene Protective film can protect numerous products to avoid scratch, damages, etc.
Thickness: 30micton to 120micron
Width: 50mm to 2000mm
PE Protective film Application: Decorative board and poly-steel material of Al-plastic bonding board, Al ceiling, Chemical PP, PVC board, stainless steel board, galvanized board etc.
PE protective film by sticky forces main performance indicators:
super low sticky PE protective film,, low sticky PE protective film, medium sticky, high sticky, super high adhesive protective film
1.super low viscosity PE protection film (is micro-end of viscosity):
characteristics: thick (≥ 0.03m ± 0.003), wide (≤ 1.3), high (100-1500), base material (PE), split strength (≤ 5G/cm), resistance temperature (60), stretch rate (>400) uses: using convenient easy posted easy tore, no residual rubber phenomenon, applies for organic sheet, instrument instrument, display, glass lenses, plastic lenses,.
2.low stick PE protection film characteristics
thick (≥ 0.03m ± 0.003), wide (≤ 1.3), high (100-1000), base material (PE), split strength (10-20G/cm), resistance temperature (60), stretch rate (>400) uses: stick force stability, posted attached sexual good, again peeling performance good, no residual rubber phenomenon, applies for steel mirror Board, titanium metal, smooth plastic Board, silk printing, Ming brand,.
3.in the low viscosity PE protection film characteristics:
thick (≥ 0.03m ± 0.003), wide (≤ 1.3), high (100-1000), base material (PE), split strength (30-50g/cm), resistance temperature (60), stretch rate (>400) uses: viscosity force stable, posted report sexual good, again peeling performance good, no residual rubber phenomenon, applies for furniture Po Lai plate, stainless steel plate, tiles, and cloud stone, and artificial stone,.
4.medium stick PE protection film characteristics:
thick (≥ 0.05 ± 0.003), wide (≤ 1.3), high (100-1000), base material (PE), split strength (60-80g/cm), resistance temperature (60), stretch rate (>400) uses: stick force stability, posted attached sexual good, again peeling performance good, no residual rubber phenomenon, applies Yu fine grain mill sand Board and General hard stick material surface protection,.
5.high stick PE protection film characteristics:
thick (≥ 0.05 ± 0.003), wide (≤ 1.3), high (100-800), base material (PE), split strength (80-100g/cm), resistance temperature (60), stretch rate (>400) uses: stick force stability, posted attached sexual good, again peeling performance good, no residual rubber phenomenon, applies Yu fine grain mill sand Board, aluminum plastic Board, hard stick plastic plates,.
6.super high adhesive PE protective film Characteristics:
thick (≥ 0.04 ± 0.003), wide (≤ 1.3), high (100-800), base material (PE), split strength (100g/cm above), resistance temperature (60), stretch rate (>400) uses: viscous special high, selection waterborne acrylic for pressure sensitivity rubber, using convenient, easy posted easy tore, no residual rubber phenomenon. applies Yu rough grain aluminum Board, hard stick material.
English
